Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
PLAT'FIX 1+1
On chassis cab : 15T to 19T
(Fitted on a PTO, rear pneumatic suspension, an 13 electric towing pin on the back of the frame and wheel size low series 60)
PLAT'FIX 1+1 CAR TRANSPORTER (DAMAGED VEHICLES, HYDRAULIC RAMP, SWIVELLING REAR RAMP)
-Hydraulic circuit with high pressure pump, filtered reservoir with indication of level
-Multi-function hydraulic distribution housed in a lit security cabinet
-Hydraulic distribution in secure illuminated cabinet installed on the rear right hand side
-Integrated shock proof wheel arches with mud guards
-Two rear roller type stabilisers
-Integrated bumper with signals and additional protection
-Sheet steel anti-slip load bed with perforations for fixing blocks, braces etc.
-Rear ramp with adjustable height, via two hydraulic pistons and inclination (approx 20° off horizontal) to reach ground level
-Bar to protect the cabin with two rubber stops
-Half-stage type 3 with elevation of the front part with 2 hydraulic cylinders and chains in 2 vertical posts and elevation of the rear part with 2hydraulic cylinders. Front and rear height adjustments in all positions with mechanical locks at the front and mechanical locks at the rear ends. Detachable anti-fall posts (weight = 1200 kg)
-A 4,5 tons hydraulic winch with 30m Ø10 cable with guide on the upper deck
-Radio control for the winch, tilt and slide of the hydraulic rear ramp and work lights
-Two adjustable, shock proof work light at the head of the platform
-A polyurethane shock proof toolbox 1000 mm
-Four adjustable wheel clamps on the lower deck
-Four adjustable wheel clamps on the upper deck
-A 6kg fire extinguisher mounted in a secure locker
-A hook-mixed screed diam. 50 + ball hitch at the rear of the equipment
-Undercoat and standard colour paint
-Deck finished in a single standard RAL colour =
-Reflective WHITE stickers on the sides of the equipment (conform to French regulation)
-VEHICLE CONFORMS TO EU REGULATIONS
Dimensions :
Exterior lower bed length : 5500 mm à 6500 mm (to define)
Exterior upper bed length : 4500 mm
Exterior bed width : 2550mm
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
PLAT'FIX PF 40 STEEL
00-PF40
[ Open for more informations ] [ Fold up ]
PLAT'FIX PF 40 galvanised steel, fixed bed, car transporter
-Welded steel construction throughout
-Two sliding aluminium load ramps stored under the bed
-Rear bumper with built in signals
-Integrated shock proof wheel arches with mud guards
-Front face and sides of deck painted, color to define RAL :
-VEHICLE CONFORMS TO REGULATIONS
Dimensions :
Exterior bed length = 5000 mm to 6500 mm (to define)
Exterior bed width = 2400 mm
Sheet steel anti-slip load bed with perforations for fixing blocks, braces
0309M120
[ Open for more informations ] [ Fold up ]
Sheet steel anti-slip load bed with perforations for fixing blocks, braces etc.
Modular, galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides
0309M100
[ Open for more informations ] [ Fold up ]
Modular galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides and wedging holes over the entire length (no paint on deck)
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat sides
0309M110
[ Open for more informations ] [ Fold up ]
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 50mm tubular sides
0309M111
[ Open for more informations ] [ Fold up ]
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Deck in ALUMINIUM reinforced sheets, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
0309M117
[ Open for more informations ] [ Fold up ]
Deck in ALUMINIUM reinforced sheets, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
A 3T6 hydraulic winch with 20 m cable diam. 10, cable guide, hydraulic circuit with pump, tank, distributors in replacement of the electric winch and the electric group (on equipment fitted on a PTO)
1103M015
[ Open for more informations ] [ Fold up ]
A 3T6 hydraulic winch with 20 m cable diam. 10, cable guide, hydraulic circuit with pump, tank, distributors in replacement of the electric winch and the electric group (on equipment fitted on a PTO)
Replacing the fixed winch cable hook with a rotating hook
1104M040
[ Open for more informations ] [ Fold up ]
Replacing the fixed winch cable hook with a rotating hook
A rubber end stop for winch cable
1104M050
[ Open for more informations ] [ Fold up ]
A rubber end stop for winch cable
A 4T5 hydraulic winch with 30 m cable diam. 10 and cable guide replacing the 3T6 hydraulic winch
1103M019
[ Open for more informations ] [ Fold up ]
A 4T5 hydraulic winch with 30 m cable diam. 10 and cable guide replacing the 3T6 hydraulic winch
7.1 ton hydraulic winch. 30m cable with guide (fitted in the middle no translation)
1103M030
[ Open for more informations ] [ Fold up ]
7.1 ton hydraulic winch. 30m cable with guide (fitted in the middle no translation) replacing the 4.5 ton hydraulic winch
Pneumatic remote clutch for 4T5 - 7T2 hydraulic winch in hydraulic control box
1110M040
[ Open for more informations ] [ Fold up ]
Pneumatic remote clutch for 4T5 - 7T2 hydraulic winch in hydraulic control box
A hook type 2 with shackle on winch cable
1109M010
[ Open for more informations ] [ Fold up ]
A hook type 2 with shackle on winch cable
Hydraulic system allowing for lateral displacement of the winch with radio control
1110M020
[ Open for more informations ] [ Fold up ]
Hydraulic system allowing for lateral displacement of the winch with radio control
Bar to protect the cabin with two rubber stops
0303M015
[ Open for more informations ] [ Fold up ]
Bar to protect the cabin with two rubber stops
A fixed ball hook diam. 50 on the front of the platform
0508M010
[ Open for more informations ] [ Fold up ]
A fixed ball hook diam. 50 on the front of the platform
A hook-mixed screed diam. 50 + ball hitch at the front of the equipment
0508M020
[ Open for more informations ] [ Fold up ]
A hook-mixed screed diam. 50 + ball hitch at the front of the equipment
A fixed ball hook diam. 50 on the rear of the equipment
0508M040
[ Open for more informations ] [ Fold up ]
A fixed ball hook diam. 50 on the rear of the equipment
A hook-mixed screed diam. 50 + ball hitch at the rear of the equipment
0508M050
[ Open for more informations ] [ Fold up ]
A hook-mixed screed diam. 50 + ball hitch at the rear of the equipment
A Rockinger tow hook for a trailer with a Ø 50 ring installed on a fixed crosstie at the rear of the equipment
0508M080
[ Open for more informations ] [ Fold up ]
A Rockinger tow hook for a trailer with a Ø 50 ring installed on a fixed crosstie at the rear of the equipment
A hydraulically expandable tow hook for equipment PLAT'FIX 2+3
0508M170
[ Open for more informations ] [ Fold up ]
A hydraulically expandable tow hook for equipment PLAT'FIX 2+3
Half-stage type 3
0511M060
[ Open for more informations ] [ Fold up ]
Type 3 half-stage with elevation of the front part with 2 hydraulic cylinders and chains in 2 vertical posts and elevation of the rear part with 2hydraulic cylinders. Front and rear height adjustments in all positions with mechanical locks at the front and mechanical locks at the rear ends. Detachable anti-fall posts (weight = 1200 kg)
Four adjustable wheel clamps on bed
0501M010
[ Open for more informations ] [ Fold up ]
Four adjustable wheel clamps on bed
Eight adjustable wheel blocks on bed (4x public works & 4x light vehicle)
0501M020
[ Open for more informations ] [ Fold up ]
Eight adjustable wheel blocks on bed (4x public works & 4x light vehicle)
A work light fitted to the front of the equipment
0101M010
[ Open for more informations ] [ Fold up ]
A work light fitted to the front of the equipment
Two integrated work lights at the head of the platform
0101M020
[ Open for more informations ] [ Fold up ]
Two integrated work lights at the head of the platform
Four work lights fitted to the front of the equipment
0101M030
[ Open for more informations ] [ Fold up ]
Four work lights fitted to the front of the equipment
A work light fitted at the rear of the equipment
0101M040
[ Open for more informations ] [ Fold up ]
A work light fitted at the rear of the equipment
Two work lights fitted at the rear of the equipment
0101M050
[ Open for more informations ] [ Fold up ]
Two work lights fitted at the rear of the equipment
Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)
0106M010
[ Open for more informations ] [ Fold up ]
Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)
Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)
0106M020
[ Open for more informations ] [ Fold up ]
Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)
Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)
0106M050
[ Open for more informations ] [ Fold up ]
Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)
A telescopic lighting tower 12V / 24V height 1,58m to 3,65m with 5 LED projectors
0101M060
[ Open for more informations ] [ Fold up ]
A telescopic lighting tower 12V / 24V height 1,58m to 3,65m with 5 LED projectors and a pneumatic height controller
A remote control for winch (winding - unwinding)
0902M030
[ Open for more informations ] [ Fold up ]
A remote control for winch (winding - unwinding)
A remote control for winch, articulation-extension of the loading ramp and working light (optional)
0902M040
[ Open for more informations ] [ Fold up ]
A remote control for winch, articulation-extension of the loading ramp and working light (optional)
A remote control for raising and lowering the front and rear of the upper deck
0902M065
[ Open for more informations ] [ Fold up ]
A remote control for raising and lowering the front and rear of the upper deck
A remote control for raising and extending the Second Car Carrier SCC
0902M050
[ Open for more informations ] [ Fold up ]
A remote control for raising and extending the Second Car Carrier SCC
One beacon fitted on the top of the cabin
0203M010
[ Open for more informations ] [ Fold up ]
One beacon fitted on the top of the cabin
Two beacons fitted on the top of the cabin
0203M020
[ Open for more informations ] [ Fold up ]
Two beacons fitted on the top of the cabin
Two LED beacons installed on swinging stems at the rear of the equipment
0203M070
[ Open for more informations ] [ Fold up ]
Two LED beacons installed on swinging stems at the rear of the equipment
Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER
0201M010
[ Open for more informations ] [ Fold up ]
Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER
Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER
0201M020
[ Open for more informations ] [ Fold up ]
Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER
Lightbar 1750mm type XPERT with 4 beacons, a central light and sign WRECKER
0201M030
[ Open for more informations ] [ Fold up ]
Lightbar 1750mm type XPERT with 4 beacons, a central light and sign WRECKER
Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign
0201M040
[ Open for more informations ] [ Fold up ]
Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign
Delux SKY AIR 1780 flasher bar with 22 LEDS and BREAKDOWN sign
0201M050
[ Open for more informations ] [ Fold up ]
Delux SKY AIR 1780 flasher bar with 22 LEDS and BREAKDOWN sign
Reminder of traffic lights in the XPERT lightbar
0201M080
[ Open for more informations ] [ Fold up ]
Reminder of traffic lights in the XPERT lightbar
Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)
0204M011
[ Open for more informations ] [ Fold up ]
Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)
Three vests, three cones, shovel and broom with mounts
0706M010
[ Open for more informations ] [ Fold up ]
Three vests, three cones, shovel and broom with mounts
A sandbox for absorbent product with support
0704M010
[ Open for more informations ] [ Fold up ]
A sandbox for absorbent product with support
Two sandbox for absorbent product with support
0704M020
[ Open for more informations ] [ Fold up ]
Two sandbox for absorbent product with support
Two fire extinguishers mounted in a secure locker
0705M010
[ Open for more informations ] [ Fold up ]
Two fire extinguishers mounted in a secure locker
A 6 Kg fire extinguisher mounted in a secure locker
0705M020
[ Open for more informations ] [ Fold up ]
A 6 Kg fire extinguisher mounted in a secure locker
Two 6 Kg fire extinguisher mounted in a secure locker
0705M030
[ Open for more informations ] [ Fold up ]
Two 6 Kg fire extinguisher mounted in a secure locker
A plastic toolbox 600mm
0401M010
[ Open for more informations ] [ Fold up ]
A plastic toolbox 600mm
A plastic toolbox 750mm
0401M020
[ Open for more informations ] [ Fold up ]
A plastic toolbox 750mm
A plastic toolbox 1000mm
0401M030
[ Open for more informations ] [ Fold up ]
A plastic toolbox 1000mm
An inox toolbox 600mm
0402M020
[ Open for more informations ] [ Fold up ]
An inox toolbox 600mm
An inox toolbox 800mm
0402M030
[ Open for more informations ] [ Fold up ]
An inox toolbox 800mm
An inox toolbox 1000mm
0402M040
[ Open for more informations ] [ Fold up ]
An inox toolbox 1000mm
LED ceiling lighting in a toolbox
0107M010
[ Open for more informations ] [ Fold up ]
LED ceiling lighting in a toolbox
An open box with 3 plastic 10 liter jerricans with support
0404M010
[ Open for more informations ] [ Fold up ]
An open box with 3 plastic 10 liter jerricans with support
An open box with 3 steel 10 liter jerricans with support
0404M020
[ Open for more informations ] [ Fold up ]
An open box with 3 steel 10 liter jerricans with support
A closed box with 3 steel 10 liter jerricans with support
0404M030
[ Open for more informations ] [ Fold up ]
A closed box with 3 steel 10 liter jerricans with support
A washstand tank with faucet on a support
0404M060
[ Open for more informations ] [ Fold up ]
A washstand tank with faucet on a support
An open galvanized mesh tray for chains with support
0405M010
[ Open for more informations ] [ Fold up ]
An open galvanized mesh tray for chains with support
An open mesh tray for chains with sliding support
0405M020
[ Open for more informations ] [ Fold up ]
An open mesh tray for chains with sliding support
Two tool boxes on each side of the winch
0405M060
[ Open for more informations ] [ Fold up ]
Two tool boxes on each side of the winch
Two wheel dollies type "CHARIOTTE " (without support)
0502M060
[ Open for more informations ] [ Fold up ]
Two wheel dollies type "CHARIOTTE " (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
0502M070
[ Open for more informations ] [ Fold up ]
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
0502M080
[ Open for more informations ] [ Fold up ]
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "CHARIOTTE" (without dollies)
0502M090
[ Open for more informations ] [ Fold up ]
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "CHARIOTTE" (without dollies)
Two wheel dollies type "GO-JACK 6313" (without support)
0502M100
[ Open for more informations ] [ Fold up ]
Two wheel dollies type "GO-JACK 6313" (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 6313" (without dollies)
0502M110
[ Open for more informations ] [ Fold up ]
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 6313" (without dollies)
An open support on the equipment for two wheel dollies type "GO-JACK 6313" (without dollies)
0502M120
[ Open for more informations ] [ Fold up ]
An open support on the equipment for two wheel dollies type "GO-JACK 6313" (without dollies)
Two wheel dollies type "FOURRIERE" (without support) (maximum speed: 50 Km/h)
0502M140
[ Open for more informations ] [ Fold up ]
Two wheel dollies type "FOURRIERE" (without support) (maximum speed: 50 Km/h)
An open support on the equipment for two wheel dollies type "FOURRIERE" (without dollies)
0502M150
[ Open for more informations ] [ Fold up ]
An open support on the equipment for two wheel dollies type "FOURRIERE" (without dollies)
A closed steel storage box with a fixed shelf for two wheel dollies type "FOURRIERE" (without dollies)
0502M160
[ Open for more informations ] [ Fold up ]
A closed steel storage box with a fixed shelf for two wheel dollies type "FOURRIERE" (without dollies)
A 2 tons SCC type “AUTOLIFT” galvanised with hydraulic elevation and extension 1200 mm
0504M010
[ Open for more informations ] [ Fold up ]
A 2 tons SCC type “AUTOLIFT” galvanised with hydraulic elevation and extension 1200 mm, removeable and adjustable galvanised lift forks, two rollers mounted under the deck, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck
Two magnetic towing lights with electric cables and flexible yellow plate
0205M010
[ Open for more informations ] [ Fold up ]
Two magnetic towing lights with electric cables and flexible yellow plate
Two suction towing lights with electric cables and flexible yellow plate
0205M020
[ Open for more informations ] [ Fold up ]
Two suction towing lights with electric cables and flexible yellow plate
Two magnetic towing lights 24V with radio control and flexible yellow plate
0205M030
[ Open for more informations ] [ Fold up ]
Two magnetic towing lights 24V with radio control and flexible yellow plate
Two suction towing lights with radio control and flexible yellow plate
0205M040
[ Open for more informations ] [ Fold up ]
Two suction towing lights with radio control and flexible yellow plate
A yellow aluminum rigid towing plate with rubber protection and traffic lights (without support)
0205M070
[ Open for more informations ] [ Fold up ]
A yellow aluminum rigid towing plate with rubber protection and traffic lights (without support)
Two jumper cables with a 12V plug on the front right of the equipment
1202M010
[ Open for more informations ] [ Fold up ]
Two jumper cables with a 12V plug on the front right of the equipment
Two jumper cables with two 12V and 24V plugs on the front right of the equipment
1202M020
[ Open for more informations ] [ Fold up ]
Two jumper cables with two 12V and 24V plugs on the front right of the equipment
Two jumper cables with a 12V plug in the right rear overhang of the equipment
1202M030
[ Open for more informations ] [ Fold up ]
Two jumper cables with a 12V plug in the right rear overhang of the equipment
Two jumper cables with two 12V and 24V plugs in the right rear overhang of the equipment
1202M040
[ Open for more informations ] [ Fold up ]
Two jumper cables with two 12V and 24V plugs in the right rear overhang of the equipment
Two jumper cables with two 12V and 24V plugs on the front left and right of the equipment (on each side)
1202M050
[ Open for more informations ] [ Fold up ]
Two jumper cables with two 12V and 24V plugs on the front left and right of the equipment (on each side)
A special motorcycle wedge with an articulated and adjustable shoe
0503M010
[ Open for more informations ] [ Fold up ]
A special motorcycle wedge with an articulated and adjustable shoe for fitting the wheel, 2 ratchet straps, 1 short traction sling, 1 special motorcycle handlebar strap and a storage rack on the equipment
A return pulley type DIABOLO with 4 sockets in the floor and support
1108M015
[ Open for more informations ] [ Fold up ]
A return pulley type DIABOLO with 4 sockets in the floor and support
A return pulley type DIABOLO with 6 sockets in the floor and support
1108M020
[ Open for more informations ] [ Fold up ]
A return pulley type DIABOLO with 6 sockets in the floor and support
Eight angled roller cable guides fixed to bed
1108M030
[ Open for more informations ] [ Fold up ]
Eight angled roller cable guides fixed to bed
Replacement of standard loading ramps with reinforced aluminium ramps
0506M115
[ Open for more informations ] [ Fold up ]
Replacement of standard loading ramps with reinforced aluminium ramps
A 3rd central loading ramp in aluminium
0506M110
[ Open for more informations ] [ Fold up ]
A 3rd central loading ramp in aluminium
Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer
0506M116
[ Open for more informations ] [ Fold up ]
Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer
Hydraulically and articulated rear overhang platform with a hydraulic loading ramp
0506M100
[ Open for more informations ] [ Fold up ]
Hydraulically and articulated rear overhang platform and adjustable in height from the ground up to 20 ° above the horizontal level with a fully hydraulic loading ramp
Anti-slip aluminium protectors on top of the two sides of the platform
0301M110
[ Open for more informations ] [ Fold up ]
Anti-slip aluminium protectors on top of the two sides of the platform
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
0601M055
[ Open for more informations ] [ Fold up ]
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
A 3 points lashing strap for light vehicle
0601M050
[ Open for more informations ] [ Fold up ]
A 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm
Ten-heads stowage embedded in the floor for your chains (5 per side)
0604M050
[ Open for more informations ] [ Fold up ]
Ten-heads stowage embedded in the floor for your chains (5 per side)
A 6T ring of hauling welded front of the winch
0604M070
[ Open for more informations ] [ Fold up ]
A 6T ring of hauling welded front of the winch
Two 3T lashing rings articulated and welded on the floor (1 per side)
0604M080
[ Open for more informations ] [ Fold up ]
Two 3T lashing rings articulated and welded on the floor (1 per side)
Two 3T lashing rings articulated and integrated on the floor (1 per side)
0604M085
[ Open for more informations ] [ Fold up ]
Two 3T lashing rings articulated and integrated on the floor (1 per side)
Four 3T lashing rings articulated and welded on the floor (2 per side)
0604M090
[ Open for more informations ] [ Fold up ]
Four 3T lashing rings articulated and welded on the floor (2 per side)
Four 3T lashing rings articulated and integrated on the floor (2 per side)
0604M095
[ Open for more informations ] [ Fold up ]
Four 3T lashing rings articulated and integrated on the floor (2 per side)
Six 3T lashing rings articulated and welded on the floor (3 per side)
0604M100
[ Open for more informations ] [ Fold up ]
Six 3T lashing rings articulated and welded on the floor (3 per side)
Six 3T lashing rings articulated and integrated on the floor (3 per side)
0604M105
[ Open for more informations ] [ Fold up ]
Six 3T lashing rings articulated and integrated on the floor (3 per side)
Six 7T lashing rings articulated and welded on the floor (3 per side)
0604M106
[ Open for more informations ] [ Fold up ]
Six 7T lashing rings articulated and welded on the floor (3 per side)
Eight 3T lashing rings articulated and welded on the floor (4 per side)
0604M110
[ Open for more informations ] [ Fold up ]
Eight 3T lashing rings articulated and welded on the floor (4 per side)
Eight hitch hooks 7T welded on the floor of platform (4 per side)
0604M116
[ Open for more informations ] [ Fold up ]
Eight hitch hooks 7T welded on the floor of platform (4 per side)
Ten 7T lashing rings articulated and welded on the floor (5 per side)
0604M126
[ Open for more informations ] [ Fold up ]
Ten 7T lashing rings articulated and welded on the floor (5 per side)
Hanging systems straps welded under the top of the two sides for securing with straps
0604M140
[ Open for more informations ] [ Fold up ]
Hanging systems straps welded under the top of the two sides for securing with straps
Rear view camera in color with flat screen in the cabin
0803M010
[ Open for more informations ] [ Fold up ]
Rear view camera in color with flat screen in the cabin
Dual camera in color for rear and platform view installed under the FLY and at the rear of the vehicule with color flat screen in the cabin
0803M030
[ Open for more informations ] [ Fold up ]
Dual camera in color for rear and platform view installed under the FLY and at the rear of the vehicule with color flat screen in the cabin
Installation of an air intake in the hydraulic controls toolbox
1205M020
[ Open for more informations ] [ Fold up ]
Installation of an air intake in the hydraulic controls toolbox
Installation of an air compressor with hose and pressure gauge
1205M030
[ Open for more informations ] [ Fold up ]
Installation of an air compressor with hose and pressure gauge
Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane
0301M015
[ Open for more informations ] [ Fold up ]
Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane
Painting of the stylized aluminum profiles in the wheelbase in a standard color
0313M220
[ Open for more informations ] [ Fold up ]
Painting of the stylized aluminum profiles in the wheelbase (painting of toolbox doors not included) in a standard color RAL=
Painting of a tool box door or the control box (unit price)
0313M230
[ Open for more informations ] [ Fold up ]
Painting of a tool box door or the control box (unit price) (multiply by the number of boxes to be painted) in a standard color same as the body
Stylized polyester body in the wheelbase (for chassis cab from 10T to 19T)
0301M020
[ Open for more informations ] [ Fold up ]
Stylized polyester body in the wheelbase with rear fenders in polyurethane (for chassis cab from 10T to 19T) painted in a RAL color standard =
tylized aluminum body in the wheelbase height 600mm with rear fenders in polyurethane (for chassis from 12T to 32T)
0301M030
[ Open for more informations ] [ Fold up ]
Stylized aluminum body in the wheelbase height 600mm with rear fenders in polyurethane (for chassis from 12T to 32T, with tool box only opening from above behind the aluminum body) painted in a standard color RAL =
A winch spare wheel
0308M010
[ Open for more informations ] [ Fold up ]
A winch spare wheel holder secured to the side of the chassis
PTO for heavy vehicle not original fitted
1003M030
[ Open for more informations ] [ Fold up ]
PTO for heavy vehicle not original fitted
White reflective tape on the edge of the platform
0801M010
[ Open for more informations ] [ Fold up ]
White reflective tape on the edge of the platform
Orange reflective tape on the edge of the platform
0801M020
[ Open for more informations ] [ Fold up ]
Orange reflective tape on the edge of the platform
"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)
0707M010
[ Open for more informations ] [ Fold up ]
"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)
In order to generate your summary sheet, please fill in this contact form. We will contact you as soon as possible.
![[New]](/gallery/actualities/79-thumb.jpeg)
