Fiault : Tow truck & Equipment Sales

  • Email
  • Phone +33 (0)2 43 04 72 63
  • Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
> PLAT’FIX > Plat'Fix PF18 steel

Plat'Fix PF18 steel

Plat'Fix PF18 steel

 

PLAT'FIX PF 18 STEEL

 

On chassis cab : 3T5 to 5T

(Fitted on a 13-pin tow plug and reinforced suspensions)

 

PLAT'FIX PF 18 STEEL : FIXED BED CAR TRANSPORTER

-Welded steel construction throughout

-Galvanised steel sheet bed with nonslip finish

-Two sliding aluminium load ramps stored under the bed

-Integrated wheel arches with mud guards

-Rear bumper with builtin signals

-Deck with GALVANIZED modular elements (unpainted), 50mm tubular edge and rigging holes along the entire length

-Bar to protect the cabin with two rubber stops

-Four ton electric (12v) winch with wired remotecontrol and twenty metres of cable

-Four adjustable wheel clamps on bed

-Fixed ball coupling hook diam. 50 at the rear of the equipment

-Front face and sides of deck painted, color to define RAL :

-VEHICLE CONFORMS TO REGULATIONS

 

Dimensions :

Exterior bed length = 4900 mm

Exterior bed width = 2100 mm

 

Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.

PLAT'FIX PF 18 STEEL

00-PF18ACIER

[ Open for more informations ] [ Fold up ]

PLAT'FIX PF 18 STEEL : FIXED BED CAR TRANSPORTER
-Welded steel construction throughout
-Galvanised steel sheet bed with nonslip finish
-Two sliding aluminium load ramps stored under the bed
-Integrated wheel arches with mud guards
-Rear bumper with builtin signals
-Front face and sides of deck painted, color to define RAL :
-VEHICLE CONFORMS TO REGULATIONS

Dimensions :
Exterior bed length = 4900 mm
Exterior bed width = 2100 mm

Modular, galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides

0309M100

[ Open for more informations ] [ Fold up ]

Modular galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides and wedging holes over the entire length (no paint on deck)

Four ton electric (12v) winch

1102M010

[ Open for more informations ] [ Fold up ]

Four ton electric (12v) winch with wired remote control and twenty metres of cable

Replacing the fixed winch cable hook with a rotating hook

1104M040

[ Open for more informations ] [ Fold up ]

Replacing the fixed winch cable hook with a rotating hook

A rubber end stop for winch cable

1104M050

[ Open for more informations ] [ Fold up ]

A rubber end stop for winch cable

A 3T6 hydraulic winch with 20 m cable diam. 10, cable guide, hydraulic circuit with pump, tank, distributors in replacement of the electric winch and the electric group (on equipment fitted on a PTO)

1103M015

[ Open for more informations ] [ Fold up ]

A 3T6 hydraulic winch with 20 m cable diam. 10, cable guide, hydraulic circuit with pump, tank, distributors in replacement of the electric winch and the electric group (on equipment fitted on a PTO)

A hook type 2 with shackle on winch cable

1109M010

[ Open for more informations ] [ Fold up ]

A hook type 2 with shackle on winch cable

Manual translation of the winch

1110M010

[ Open for more informations ] [ Fold up ]

Manual translation of the winch

Bar to protect the cabin with two rubber stops

0303M015

[ Open for more informations ] [ Fold up ]

Bar to protect the cabin with two rubber stops

High bar to protect the cabin type FLY with two rubber stops

0303M025

[ Open for more informations ] [ Fold up ]

-High bar to protect the cabin type FLY with two rubber stops

A fixed ball hook diam. 50 on the front of the platform

0508M010

[ Open for more informations ] [ Fold up ]

A fixed ball hook diam. 50 on the front of the platform

A fixed ball hook diam. 50 on the rear of the equipment

0508M040

[ Open for more informations ] [ Fold up ]

A fixed ball hook diam. 50 on the rear of the equipment

Four adjustable wheel clamps on bed

0501M010

[ Open for more informations ] [ Fold up ]

Four adjustable wheel clamps on bed

A work light fitted to the front of the equipment

0101M010

[ Open for more informations ] [ Fold up ]

A work light fitted to the front of the equipment

Two integrated work lights at the head of the platform

0101M020

[ Open for more informations ] [ Fold up ]

Two integrated work lights at the head of the platform

Four work lights fitted to the front of the equipment

0101M030

[ Open for more informations ] [ Fold up ]

Four work lights fitted to the front of the equipment

A work light fitted at the rear of the equipment

0101M040

[ Open for more informations ] [ Fold up ]

A work light fitted at the rear of the equipment

Two work lights fitted at the rear of the equipment

0101M050

[ Open for more informations ] [ Fold up ]

Two work lights fitted at the rear of the equipment

Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)

0106M010

[ Open for more informations ] [ Fold up ]

Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)

Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)

0106M020

[ Open for more informations ] [ Fold up ]

Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)

Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)

0106M050

[ Open for more informations ] [ Fold up ]

Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)

A remote control COME-UP for winch (winding - unwinding)

0902M035

[ Open for more informations ] [ Fold up ]

A remote control COME-UP for winch (winding - unwinding)

One beacon fitted on the top of the cabin

0203M010

[ Open for more informations ] [ Fold up ]

One beacon fitted on the top of the cabin

Two beacons fitted on the top of the cabin

0203M020

[ Open for more informations ] [ Fold up ]

Two beacons fitted on the top of the cabin

Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER

0201M010

[ Open for more informations ] [ Fold up ]

Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER

Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER

0201M020

[ Open for more informations ] [ Fold up ]

Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER

Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign

0201M040

[ Open for more informations ] [ Fold up ]

Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign

Reminder of traffic lights in the XPERT lightbar

0201M080

[ Open for more informations ] [ Fold up ]

Reminder of traffic lights in the XPERT lightbar

Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)

0204M010

[ Open for more informations ] [ Fold up ]

Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)

Three vests, three cones, shovel and broom with mounts

0706M010

[ Open for more informations ] [ Fold up ]

Three vests, three cones, shovel and broom with mounts

A sandbox for absorbent product with support

0704M010

[ Open for more informations ] [ Fold up ]

A sandbox for absorbent product with support

Two fire extinguishers mounted in a secure locker

0705M010

[ Open for more informations ] [ Fold up ]

Two fire extinguishers mounted in a secure locker

A plastic toolbox 600mm

0401M010

[ Open for more informations ] [ Fold up ]

A plastic toolbox 600mm

LED ceiling lighting in a toolbox

0107M010

[ Open for more informations ] [ Fold up ]

LED ceiling lighting in a toolbox

An open box with 3 plastic 10 liter jerricans with support

0404M010

[ Open for more informations ] [ Fold up ]

An open box with 3 plastic 10 liter jerricans with support

An open box with 3 steel 10 liter jerricans with support

0404M020

[ Open for more informations ] [ Fold up ]

An open box with 3 steel 10 liter jerricans with support

A washstand tank with faucet on a support

0404M060

[ Open for more informations ] [ Fold up ]

A washstand tank with faucet on a support

Two wheel dollies type "CHARIOTTE " (without support)

0502M060

[ Open for more informations ] [ Fold up ]

Two wheel dollies type "CHARIOTTE " (without support) (maximum speed: 10 Km/h)

Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)

0502M070

[ Open for more informations ] [ Fold up ]

Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)

An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)

0502M080

[ Open for more informations ] [ Fold up ]

An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)

Two jumper cables with a 12V plug on the front right of the equipment

1202M010

[ Open for more informations ] [ Fold up ]

Two jumper cables with a 12V plug on the front right of the equipment

Two jumper cables with a 12V plug in the right rear overhang of the equipment

1202M030

[ Open for more informations ] [ Fold up ]

Two jumper cables with a 12V plug in the right rear overhang of the equipment

A special motorcycle wedge with an articulated and adjustable shoe

0503M010

[ Open for more informations ] [ Fold up ]

A special motorcycle wedge with an articulated and adjustable shoe for fitting the wheel, 2 ratchet straps, 1 short traction sling, 1 special motorcycle handlebar strap and a storage rack on the equipment

A return pulley type DIABOLO with 4 sockets in the floor and support

1108M015

[ Open for more informations ] [ Fold up ]

A return pulley type DIABOLO with 4 sockets in the floor and support

A 3rd central loading ramp in aluminium

0506M110

[ Open for more informations ] [ Fold up ]

A 3rd central loading ramp in aluminium

Replacement of standard loading ramps with reinforced aluminium ramps

0506M115

[ Open for more informations ] [ Fold up ]

Replacement of standard loading ramps with reinforced aluminium ramps

Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer

0506M116

[ Open for more informations ] [ Fold up ]

Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer

Anti-slip aluminium protectors on top of the two sides of the platform

0301M110

[ Open for more informations ] [ Fold up ]

Anti-slip aluminium protectors on top of the two sides of the platform

A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm

0601M055

[ Open for more informations ] [ Fold up ]

A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm

A 3 points lashing strap for light vehicle

0601M050

[ Open for more informations ] [ Fold up ]

A 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm

Two lateral aluminum side panels (1 per side

0310M090

[ Open for more informations ] [ Fold up ]

Two lateral aluminum side removable panels (1 per side) can be fitted between the front of the platform and 1 removable post on the equipment

Four lateral aluminum side removable panels (2 per side)

0310M110

[ Open for more informations ] [ Fold up ]

Four lateral aluminum side removable panels (2 per side) can be fitted between the front of the platform and 1 removable post on the equipment

Rear view camera in color with flat screen in the cabin

0803M010

[ Open for more informations ] [ Fold up ]

Rear view camera in color with flat screen in the cabin

Installation of an air compressor with hose and pressure gauge

1205M030

[ Open for more informations ] [ Fold up ]

Installation of an air compressor with hose and pressure gauge

A winch spare wheel

0308M010

[ Open for more informations ] [ Fold up ]

A winch spare wheel holder secured to the side of the chassis

Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane

0301M015

[ Open for more informations ] [ Fold up ]

Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane

PTO for light vehicle not original fitted

1003M010

[ Open for more informations ] [ Fold up ]

PTO for light vehicle not original fitted

Automatic engine speed accelerator for PTO (CABSTAR / MAXITY)

1011M010

[ Open for more informations ] [ Fold up ]

Automatic engine speed accelerator for PTO (CABSTAR / MAXITY)

White reflective tape on the edge of the platform

0801M010

[ Open for more informations ] [ Fold up ]

White reflective tape on the edge of the platform

Orange reflective tape on the edge of the platform

0801M020

[ Open for more informations ] [ Fold up ]

Orange reflective tape on the edge of the platform

"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)

0707M010

[ Open for more informations ] [ Fold up ]

"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)

Configurator
[ Open ]
PLAT'FIX PF 18 STEEL

PLAT'FIX PF 18 STEEL

00-PF18ACIER

Generate the summary sheet

Fiche récapitulative

In order to generate your summary sheet, please fill in this contact form. We will contact you as soon as possible.